Description

This is an POWER transformer made by MAGNETICS & WINDINGS corporation. It measures2.46" x 3.15" from center to center on the mounting holes, and 4.41 x 3.17 x 3.80" on the transformer itself. It weighs 6 pounds 13 oz. This transformer was pulled from a Heathkit IO -18 oscilloscope. I have tested this transformer and it is as follows: Power Transformer (P: 120/240V; S: 1380.625V w/ 3 Taps (330V & 660V)@85mA & 1380V@3mA & 0.625V@300mA; 6.3V, [email protected] CT) NOTE: THE CENTER TAP ON THIS THRANSFORMER, IS A SINGLUAR TAP , THAT SERVES BOTH THE B+ AND THE 6.5 VAC TAPS. THIS TOOK ME AWHILE TO FIGURE OUT, SO DON'T MAKE THE ERROR IN WIRERING UP YOU AMP. MOST OF THE TIME MANUFACTURERS PROVIDE SEPARATE TAPS BUT ON THIS ONE THEY DON'T. BOTH GET TIED TO GROUND SO THERE IS NO PROBLEM. THEY HAVE ACTUALLY SAVED YOU A SOLDER CONNECTION. Listing and template services provided by inkFrog